water pump impeller

water pump impeller 1.Certificate:ISO/TS16949 2.Thickness:1.5-0.04mm 3.Material requirement:GB699-1999

                            water pump impeller

The the production processes of  water pump impeller

1.IQC:check the DOB,the component should accord with  "GB699-1999".The surface is without bubble,flaw,scab,crack,impurity and obvious scarification,it can't be have layer.The sickness of steel plate is 1.5-0.04mm.

2.Store:put-in-storage:make the storage mark and quality state mark.Used base plate or shelf to separate steel plate from floor,ensure to moistureproof.

3.Picking:follow up FIFO policy,ensure the item and quatity agreen with material requisition.It should handle with care.

4.Process :(1).shear(The size is accord with "cold stamping process card".) → (2).blanking → (3).stretch(free of dents) → (4).profiling(without cinc mark) → (5).scrap edge → (6).forming → (7).nubbincutoffmachi → (8).burring → (9).checking(without cinc mark or burrs or others) → (10).finish(galvanized) → (11).checking(surface is without phanic coating defects,and the coating is clean,and not damage.The surface is bright.It quickly rub 10-15s with each othre,the coating is without bubble or metal peel.)

The feature of water pump impeller

1. Workpiece surface smooth, the transition smooth without cracks, creases and other defects.

2. Remove the sharp edges, burrs.

3. If not marked tolerances, we will in accordance with the data -0.25~+0.25.

4. Coated with anti-rust oil after cleaning the surface.

5. Impeller and bearing tight fit to withstand more torque 20N.m, welded to withstand tensile strength over 5N.

6. Surface can be galvanized and so on. 

Applied Range of water pump impeller

Widely used in Auto Industry,petrochemical industry,pharmacy,food wine sewage treatment,Purification dust removal auto parts and other machine parts.

water pump impeller